Bersonders in Germany with respect to rule of the conceptual distinction between different types of furnaces often great misunderstanding. Again and again I note that there is talk of "tiled" and one of my verkachelten a basic stove and others speak of an insert stove. Therefore, I treat at this point now the basic stove! The term Grundofen is the furnace technology that lies within!
Digression: Only if the shell a basic furnace verkachelt continuous, one would correctly call it a lounge! An exception to this is the Spirit of Fire stove because it has also rendered a tile surface coat. In all other cases, one would have to speak of a cleaning oven (unfortunately there is in the name of much disagreement, which become part unscrupulous advantage, which ultimately damages the reputation of the tile base furnace much!
But we come back to the furnace technology of a basic stove! The reason may furnace is planned to complete the inside and built individually. hang the combustion chamber size and the shape of the flues on the size and shape of the furnace. Therefore, the Grundofen be adapted exactly to the heat demand and get exactly the required performance. Built to the firebox and flue gas lines of the basic furnace ideally with Luxit or, if need be, with Hafner grog. But be careful in the choice of refractory, since there are very large Hafner fireclay quality difference!
graphics you see on a typical cross-section of a basic furnace. Since the basic furnace is built completely with Luxit and his coat is usually covered with full tiles, has an average basic stove around 2000 to 3000 kg (the weight is ultimately also an indicator of the storage capacity: The more severe, more stores a basic stove).
Sparked the basic stove fire in time. This means that all wood for the Nennheizzeit (usually 12 hours) burned at one time and then, if only more heat and small bluish flame can be seen, the combustion chamber sealed and the basic stove is the resulting heat via the Nennheizzeit slowly into the room in the form of radiant heat. This "interruption" of the tile stove is usually carried out manually. However, there are now also automatic shut-off devices to incorporate the tight closure of the furnace automatically.
The advantages of the basic furnace are:
• Is the heat on Weigend in the form of radiant heat (no convection)
• Low consumption of wood
• Only about 1-2 times per heating season Aschentleerung
disadvantage
• Is his first heat from a time delay of 1-2 hours. This disadvantage is mitigated, however, with regular use, as a basic stove unfolds only after two or three heating cycles to its full capacity, because then the entire memory is fully charged and then often after a day in winter heating break is always warm. Ideally, you should fire up the basic stove all winter and cool day so not all winter. Next to the fireplace is
Infois heating it also Spirit of Fire stoves and fireplaces
0 comments:
Post a Comment