especially in Germany, we speak mostly of a stove and said oven technically an insert stove. I would like to reiterate that the term "stove", strictly speaking, refers to the optical coating of a furnace, and still are inconclusive on how the furnace is set up technically. I will limit myself here on the technical description of the use of the furnace.
As you can clearly see in this picture, the use of furnace heating a finished part - one application - in the combustion takes place. The application can either flow into the chimney, will be equipped with a metal or ceramic Nachheizkasten trains (Figure) exhibit. The Nachheizkasten and the ceramic Trains are primarily used to improve performance (this escape the flue gases also heat energy before they reach the chimney), the ceramic coatings have the added advantage that you can store more heat. Otherwise, the only memory of the heat storage and radiation of the furnace shell.
Usually the firing of Grundofenfeuerung modeled (Muldenfeuerung). Fired furnace, the use as needed. Thus, it can continuously fire (like the stove or fireplace) are fired, or even in time of fire. The lights in the time of fire, as we know it from the bottom oven, makes sense only if a suitably large memory (ceramic tile coatings and cladding) is available. Typically, when using wood stove about every 4 hours is added.
A frequent question: "How do I distinguish a basic furnace by an insert stove
Answer:. The use of furnace usually has at the top of an air outlet in the form of a grid, from where the Warmluftz get into the living room if you go in there looking you will usually . even the iron use and, if available, a Nachheizkasten metal
advantage
• Is faster heat than the basic stove
disadvantage
• its heat there predominantly in the form of hot air (convection)
• Increased use of wood as the basic stove
• More frequent Aschentleeren than the basic stove
• Does the heat does not rise as long as the basic stove.
0 comments:
Post a Comment